Routers / Peplink
Peplink Balance 20X
Default access and factory-reset steps, cited to the manufacturer.
For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.
- Login address
- http://192.168.1.1
- Gateway IP
- 192.168.1.1
- Username
- admin
- Password
- admin
Dual-WAN business SD-WAN router: one Gigabit Ethernet WAN plus an embedded Cat-4/Cat-7 LTE modem and a FlexModule slot; the Wi-Fi variant adds 802.11ac. Genuine static admin/admin default, and Peplink forces a password change on the first successful login. Confirm the LAN IP against the device label — the manual is Balance-line-generic.
Factory reset
With a paperclip, press and hold the recessed reset button — ~5-10 seconds for an admin-password reset (status LED blinks red twice) or ~20 seconds for a full factory reset (blinks red three times) — then release. After reboot, browse to https://192.168.1.1 and log in.
Source: Peplink Balance User Manual, firmware 8.1.1 (official)verified · medium confidence · updated 2026-07-14