AVM FRITZ!Repeater 2400 default password & login IP

The AVM FRITZ!Repeater 2400 ships with a unique password printed on the device label, not a shared default — log in at its admin page.

Username

— none —

Password

— on the device label —

The password is unique to your unit and printed on a sticker on the router (often labelled Password or Access Key).

Wi-Fi mesh range extender, paired with a FRITZ!Box or another FRITZ!Repeater as Mesh Master — a tier beyond the already-seeded FRITZ!Repeater 1200 AX and 6000. Official AVM knowledge base: "The user interface of your FRITZ!Repeater is either protected with a unique password in the factory settings or you must assign your own password the first time you open the user interface... If your FRITZ!Repeater does have a factory-set password, the password is located on the type label of the FRITZ!Repeater and consists of one word with 4 to 6 lower-case letters, followed by 4 numerals."

Factory reset

Press and hold the recessed RESET button (use a pin) for about 15 seconds until the LEDs flash, or trigger 'Load factory settings' from the repeater's/FRITZ!Box's user interface.

More AVM models

• AVM FRITZ!Box 7590
• AVM FRITZ!Box 7590 AX
• AVM FRITZ!Box 7530
• AVM FRITZ!Box 7530 AX
• AVM FRITZ!Box 7490
• AVM FRITZ!Box 5590 Fiber
• AVM FRITZ!Box 6660 Cable
• AVM FRITZ!Box 4060