What is the default login IP for the Palo Alto Networks PA-220?

The Palo Alto Networks PA-220 default login IP is 192.168.1.1 — open http://192.168.1.1 in a browser on the router's own network.

What is the default username for the Palo Alto Networks PA-220?

The Palo Alto Networks PA-220 default admin username is admin. The matching default password is admin.

Palo Alto Networks PA-220 default password & login IP

The Palo Alto Networks PA-220 default login is admin / admin at http://192.168.1.1.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.

Login address: http://https://192.168.1.1
Gateway IP: 192.168.1.1
Username: admin
Password: admin

First whole-brand coverage of Palo Alto Networks' NGFW line. Palo Alto's own PAN-OS admin documentation states: "By default, the PA-Series NGFW has: An IP address of 192.168.1.1, A username/password of admin/admin."

Factory reset

Connect a PC to the MGT port, set the PC's NIC to the 192.168.1.0/24 subnet, and browse to https://192.168.1.1. Log in with admin/admin — PAN-OS immediately forces a new password on first login. To factory-reset, use 'request system private-data-reset' from the CLI or boot into maintenance mode.

More Palo Alto Networks models

Source: Palo Alto Networks — Perform the Initial Setup and Configuration for NGFWs (PAN-OS Admin Guide)verified · updated 2026-10-05

FAQ

What is the default password for the Palo Alto Networks PA-220?: The Palo Alto Networks PA-220 default login is admin / admin at http://192.168.1.1.
What is the default login IP for the Palo Alto Networks PA-220?: The Palo Alto Networks PA-220 default login IP is 192.168.1.1 — open http://192.168.1.1 in a browser on the router's own network.
What is the default username for the Palo Alto Networks PA-220?: The Palo Alto Networks PA-220 default admin username is admin. The matching default password is admin.
How do I factory-reset the Palo Alto Networks PA-220?: Connect a PC to the MGT port, set the PC's NIC to the 192.168.1.0/24 subnet, and browse to https://192.168.1.1. Log in with admin/admin — PAN-OS immediately forces a new password on first login. To factory-reset, use 'request system private-data-reset' from the CLI or boot into maintenance mode.

Verification history (2)

Every time we've checked this model's default credentials, oldest first — including when nothing changed. Absence of change over time is itself the evidence.

2026-10-05First verified· static
source →
2026-10-05Re-verified, unchanged· static
source →

All Palo Alto Networks models →Identify a device by MAC →Report an error →