Tenda AC8 (AC1200)

Default access and factory-reset steps, cited to the manufacturer.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.

Login address: http://tendawifi.com
Gateway IP: 192.168.0.1
Username: — none —
Password: — on the device label —

The password is unique to your unit and printed on a sticker on the router (often labelled Password or Access Key).

No admin/admin default. On modern Tenda firmware the first web login at tendawifi.com uses the Wireless Password printed on the router's rear label; the setup wizard then has you create separate Wi-Fi and login passwords.

Factory reset

Reset: with the router powered on, use a pin to press and hold the RESET hole for about 5-8 seconds until the LEDs blink, then release and wait ~1 minute for reboot. Reconnect to the default Tenda_XXXXXX Wi-Fi using the password on the label, browse to tendawifi.com or 192.168.0.1, and run the setup wizard to set a new login password.

Source: Tenda Official Support - How to login to the web management pageverified · medium confidence · updated 2026-07-13

Identify a device by MAC →Report an error →