ssid.aiAPI

Zain Huawei DG8245V (Zain Fiber Home Gateway) default password & login IP

The Zain Huawei DG8245V (Zain Fiber Home Gateway) default login is user / HuaweiUser at http://192.168.1.1.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.
Login address
http://192.168.1.1
Gateway IP
192.168.1.1
Username
user
Password
HuaweiUser

Saudi Arabia — Zain KSA's official Fiber CPE activation deck for the Huawei DG8245V home gateway (GPON ONT + router + telephony, DSL port unused in Zain's fiber deployment). Zain's own PDF states: "The username and password mentioned in the bottom of CPE: Username: user / Password: HuaweiUser", shown against a photo of an actual unit's label — distinct from the per-unit random Wi-Fi SSID/key printed on the same label just below it.

Factory reset

Browse to http://192.168.1.1 and log in with the username/password printed on the label on the bottom of the CPE (Zain's own guide gives user / HuaweiUser as the printed default); a rear reset button restores factory defaults if changed.

More Zain models

Source: Zain KSA — Zain Fiber CPE Activation: DG8245W2/DG8245V First Time Configuration (official PDF)verified · updated 2026-09-21

FAQ

What is the default password for the Zain Huawei DG8245V (Zain Fiber Home Gateway)?
The Zain Huawei DG8245V (Zain Fiber Home Gateway) default login is user / HuaweiUser at http://192.168.1.1.
What is the default login IP for the Zain Huawei DG8245V (Zain Fiber Home Gateway)?
The Zain Huawei DG8245V (Zain Fiber Home Gateway) default login IP is 192.168.1.1 — open http://192.168.1.1 in a browser on the router's own network.
What is the default username for the Zain Huawei DG8245V (Zain Fiber Home Gateway)?
The Zain Huawei DG8245V (Zain Fiber Home Gateway) default admin username is user. The matching default password is HuaweiUser.
How do I factory-reset the Zain Huawei DG8245V (Zain Fiber Home Gateway)?
Browse to http://192.168.1.1 and log in with the username/password printed on the label on the bottom of the CPE (Zain's own guide gives user / HuaweiUser as the printed default); a rear reset button restores factory defaults if changed.

Verification history (3)

Every time we've checked this model's default credentials, oldest first — including when nothing changed. Absence of change over time is itself the evidence.

  1. 2026-09-21First verified· static
    source →
  2. 2026-09-21Re-verified, unchanged· static
    source →
  3. 2026-09-21Re-verified, unchanged· static
    source →
All Zain models →Identify a device by MAC →Report an error →