ssid.aiAPI

D-Link DIR-X3260 (EXO AX3200) default password & login IP

The D-Link DIR-X3260 (EXO AX3200) default login is admin / password at http://192.168.0.1.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.
Login address
http://dlinkrouter.local
Gateway IP
192.168.0.1
Username
— none —
Password
password

AX3200 dual-band mesh-capable Wi-Fi 6 EXO-series router with Gigabit WAN — a lower-tier sibling of the DIR-X4860. The first web login prompts only for a Device/Admin Password with the factory value "password" (no username). D-Link: "You will be asked for your Device/Admin Password. By default this password is 'password'."

Factory reset

Power the router on, then use a paperclip to hold the recessed rear Reset button ~10 seconds and release to restore factory defaults; the Device/Admin password reverts to "password".

More D-Link models

Source: D-Link DIR-X3260 REV A1 Quick Installation Guide v1.01 — official PDFverified · updated 2026-08-09

FAQ

What is the default password for the D-Link DIR-X3260 (EXO AX3200)?
The D-Link DIR-X3260 (EXO AX3200) default login is admin / password at http://192.168.0.1.
What is the default login IP for the D-Link DIR-X3260 (EXO AX3200)?
The D-Link DIR-X3260 (EXO AX3200) default login IP is 192.168.0.1 — open http://192.168.0.1 in a browser on the router's own network.
How do I factory-reset the D-Link DIR-X3260 (EXO AX3200)?
Power the router on, then use a paperclip to hold the recessed rear Reset button ~10 seconds and release to restore factory defaults; the Device/Admin password reverts to "password".

Verification history (1)

Every time we've checked this model's default credentials, oldest first — including when nothing changed. Absence of change over time is itself the evidence.

  1. 2026-08-09First verified· static
    source →
All D-Link models →Identify a device by MAC →Report an error →