What is the default username for the D-Link M30 (AQUILA PRO AI AX3000)?

The D-Link M30 (AQUILA PRO AI AX3000) default admin username is Admin. The matching password is unique to your unit and printed on the sticker on the router.

D-Link M30 (AQUILA PRO AI AX3000) default password & login IP

The D-Link M30 (AQUILA PRO AI AX3000) ships with a unique password printed on the device label, not a shared default — log in at its admin page.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.

Username: Admin
Password: — on the device label —

The password is unique to your unit and printed on a sticker on the router (often labelled Password or Access Key).

Entry AQUILA PRO AI mesh: AX3000 dual-band Wi-Fi 6 (802.11ax, 574 + 2402 Mbps), sold as 2- and 3-node kits for whole-home coverage. Login username is Admin; there is no static default — each node ships with its own random Device Password on the bundled Quick Installation Card. Browser config lives at the MAC-derived devicesetup.net host. D-Link M30 QIG: "http://xxxx.devicesetup.net/ (XXXX represents the last 4 characters of the MAC address) Device Password: XXXXXX."

Factory reset

With the router powered on, press the recessed Reset button with a paperclip for 1 second and then release it to restore factory default settings, then re-run setup in the D-Link AI app.

More D-Link models

Source: D-Link M30 Quick Installation Guide (Rev A1) — official PDFverified · updated 2026-08-16

FAQ

What is the default password for the D-Link M30 (AQUILA PRO AI AX3000)?: The D-Link M30 (AQUILA PRO AI AX3000) ships with a unique password printed on the device label, not a shared default — log in at its admin page.
What is the default username for the D-Link M30 (AQUILA PRO AI AX3000)?: The D-Link M30 (AQUILA PRO AI AX3000) default admin username is Admin. The matching password is unique to your unit and printed on the sticker on the router.
How do I factory-reset the D-Link M30 (AQUILA PRO AI AX3000)?: With the router powered on, press the recessed Reset button with a paperclip for 1 second and then release it to restore factory default settings, then re-run setup in the D-Link AI app.

Verification history (1)

Every time we've checked this model's default credentials, oldest first — including when nothing changed. Absence of change over time is itself the evidence.

2026-08-16First verified· label-unique
source →

All D-Link models →Identify a device by MAC →Report an error →