Routers / Linksys
Linksys E8450 (AX3200 WiFi 6)
Default access and factory-reset steps, cited to the manufacturer.
For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.
- Login address
- http://myrouter.local
- Gateway IP
- 192.168.1.1
- Username
- — none —
- Password
- admin
No admin/admin: the router's default web-interface password is 'admin' with no username. Latest firmware forces HTTPS, so use https:// (an http:// URL will fail). You are expected to set your own password on first login.
Factory reset
Hold the Reset button on the bottom for about 10 seconds until the lights flash, then release and let it reboot to factory defaults. On current firmware an HTTPS connection is required: browse to https://myrouter.local (or https://192.168.1.1, or https://10.0.0.1 if the router sits behind another gateway) and log in with the default password 'admin'.
Source: Linksys Official Support — Log in to the Dual-Band WiFi Router's web interfaceverified · updated 2026-07-13