Linksys MR7350 (MAX-STREAM AX1800 Mesh WiFi 6)

Default access and factory-reset steps, cited to the manufacturer.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.

Login address: http://myrouter.local
Gateway IP: 192.168.1.1
Username: — none —
Password: admin

There is no admin/admin here: the documented default administrator password of an unconfigured MR7350 is literally 'admin' (no username). The unique password printed on the bottom label is the WiFi password, not the admin password. Linksys prompts you to set your own admin password during app setup.

Factory reset

Press and hold the Reset button on the bottom of the router for about 10 seconds until the lights indicate a reset, then release and let it reboot to factory defaults. Reconnect to the default WiFi (_LinksysSetupXXX, using the unique WiFi password on the bottom label) or plug in by Ethernet, then finish setup in the Linksys app, or log in at http://192.168.1.1 with the admin password. If you forgot a changed password, use the 5-digit recovery code on the product label.

Source: Linksys Official Support — MR7350 FAQsverified · updated 2026-07-13

Identify a device by MAC →Report an error →