TP-Link Archer AX10 (AX1500)

Default access and factory-reset steps, cited to the manufacturer.

For regaining access to a router you own or administer. If you didn't set it up, ask whoever did.

Login address: http://tplinkwifi.net
Gateway IP: 192.168.0.1
Username: — none —
Password: — no default —

You create this password the first time you set up the router. If you never changed it, factory-reset and set a new one.

On first login this router requires you to create an admin password — there is no admin/admin default on current firmware. The default Wi-Fi network name and password are printed on the label on the bottom of the router.

Factory reset

With the router powered on, use a pin to press and hold the recessed Reset button on the back for about 10 seconds until the LEDs blink, then release. The router reboots to factory defaults. Reconnect to the default Wi-Fi (SSID and password on the bottom label), open http://tplinkwifi.net or 192.168.0.1, and create a new admin password when prompted.

Source: TP-Link Official — Archer AX10 & AX1500 User Guideverified · updated 2026-07-13

Identify a device by MAC →Report an error →